Tisztelt Üzleti Partnereink, ezúton tájékoztatjuk Önöket, hogy raktáráruházunk augusztus 20-21. között zárva tart.

Drives for sliding gates

(67 products)
Posuvne

Choosing the Right Drive for a Sliding Gate

Electromechanical drives are the most common choice for sliding gates in residential and commercial properties. These drives are reliable, durable, and offer excellent value for money. Electromechanical drives are categorized by their power supply into AC (alternating current) and DC (direct current) motors, each with its own specific advantages and application areas.

Types of Electromechanical Drives:

1. Drives with AC Power Supply

AC drives use alternating current and are known for their stability and high torque. Thanks to the higher torque, they can effectively drive heavier gates, ensuring reliable operation even under demanding conditions.

  • Advantages: High torque, ideal for heavy and large gates, long lifespan.
  • Application: Suitable for commercial properties or gates with high weight where continuous and intensive operation is required.

2. Drives with DC Power Supply

DC drives use direct current, allowing them to operate efficiently with lower energy consumption and less heat generation. As a result, they can handle a higher number of opening and closing cycles, which is ideal for gates with high usage frequency.

  • Advantages: Low energy consumption, less heat generation, ability to handle a higher number of cycles, quiet operation.
  • Application: Suitable for residential gates or gates with higher usage frequency, where efficient and quiet operation is needed.

What to Consider When Choosing a Drive for Sliding Gates

Choosing the right drive for your sliding gate depends on several key factors:

  • Type of Gate: It’s important to consider whether it’s a cantilever gate or a rolling gate. Cantilever gates require a more powerful drive since they must overcome their own weight without support, while rolling gates are usually less demanding on the drive.
  • Wing Weight: The drive must be strong enough to handle the weight of your gate. For heavier gates, AC drives are more suitable, offering higher torque.
  • Wing Length: Longer gates require a stronger motor and may need a drive with higher power to ensure smooth movement.
  • Usage Intensity: If the gate is used frequently, such as in commercial or residential complexes, DC drives can be advantageous due to their lower heat generation and ability to handle a higher number of cycles.
  • Location of the Gate: Consider whether the gate is on flat ground or on a slope. Gates installed on a slope require a more powerful drive that can overcome gravitational resistance during opening or closing.

Take Advantage of Our Product Filtering System

On our website, you will find a wide range of drives for sliding gates. To find the right drive for your gate, we recommend using our clear filtering system. With the filters, you can easily select a drive based on the type of power supply, performance, wing weight, and other parameters. If you need further assistance with your selection, don’t hesitate to contact us.


  • Set of propulsion for sliding gate set, max 400kg SLH-400-BDKIT

    Mark
    Nice
    Max. wing length
    6m
    Module of the gear comb
    mod 4
    154.881 Ft
    without VAT
    196.699 Ft with VAT
    In stock (22 units)
    PCS
    Part of set

    Receiver 4- canals NICE ONE OXIBD

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44

    LED flashlight with integrated antenna 12 - 24V ELDC

    1 pcs
    Mark
    Nice
  • NICE actuator for sliding gates ROBUS1000-ZKIT

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    183.956 Ft
    without VAT
    233.624 Ft with VAT
    In stock (282 units)
    SET
    Part of set

    Automatic motor with BLUEBUS electronics do 1000kg ROBUS-1000

    1 pcs
    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    Required products

    Receiver 4- canals NICE ONE OXIBD

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44
  • NICE sliding gate drive, max 1000kg with photocells ROX-1000-ZKIT

    Mark
    Nice
    Max. wing length
    5m
    Module of the gear comb
    mod 4
    Required products
    134.803 Ft
    without VAT
    171.200 Ft with VAT
    In stock (75 units)
    SET
    Alternatives
    Required products
    Part of set

    NICE actuator for sliding gates ROBUS1000-ZKIT

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    183.956 Ft
    without VAT
    233.624 Ft with VAT
    In stock (282 units)
    SET

    Toothed steel rack PVC+Fe,27x20mm,L1m,max 700kg H/01PVC

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    700
    2.317 Ft
    without VAT
    2.943 Ft with VAT
    In stock (4026 units)
    SET

    NICE automation for sliding gates, max 1000kg ROX-1000

    1 pcs
    Mark
    Nice
    Max. wing length
    5m
    Module of the gear comb
    mod 4
    Required products

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • CAME automation for sliding gates, set, max 400kg BXV-4-ZKIT

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    Required products
    116.503 Ft
    without VAT
    147.959 Ft with VAT
    In stock (77 units)
    PCS
    Alternatives
    Required products
    Part of set
    Sets

    Full NICE system for sliding gates max 400kg ROAD-400

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    Required products
    89.157 Ft
    without VAT
    113.229 Ft with VAT
    In stock (483 units)
    PCS

    Aluminium Self-Supporting Sliding Gate 6x2.125m with Rectangular Infill 20x100 Anthracite R7016, without Tensioner, with FG/S-CLG-R7016-GA-SET-ECO

    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Textured powder coating
    Effect
    Anthracite
    Out of stock
    794.556 Ft
    without VAT
    1.009.086 Ft with VAT
    Backordered
    SET

    Hliníková samonosná posuvná brána 6x2,125m s obdĺžnikovou výplňou 20x100, Antracit R7016, s napinákom a pohonom - SET FG/S-CLG-R7016-GA-SET-PRO

    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Out of stock
    791.610 Ft
    without VAT
    1.005.345 Ft with VAT
    Backordered
    SET

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    13.787 Ft
    without VAT
    17.509 Ft with VAT
    In stock (459 units)
    PCS

    Electronics for BXV drives ZN-7

    1 pcs
    Mark
    Came

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP roling code, 4CH, CAME TOP44RBN

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • CAME automation for sliding gates, set, max 1800kg BKS-1800-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4
    199.371 Ft
    without VAT
    253.201 Ft with VAT
    Low stock (17 units)
    SET
    Part of set

    Automatic motor with electronics 1200kg BKS-1800

    1 pcs
    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP rolling code, 4CH, CAME TOPD4RBS

    2 pcs
    Mark
    Came
    Frequency (MHz)
    Multi (433/868)
    Code type
    Rolling

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • CAME automation for sliding gates, set, max 1200kg BKS-1200-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4
    198.030 Ft
    without VAT
    251.498 Ft with VAT
    Low stock (17 units)
    SET
    Part of set

    Automatic motor with electronics 1200kg BKS-1200

    1 pcs
    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP rolling code, 4CH, CAME TOPD4RBS

    2 pcs
    Mark
    Came
    Frequency (MHz)
    Multi (433/868)
    Code type
    Rolling
  • NICE automation max 1500kg THOR-1500

    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4
    129.602 Ft
    without VAT
    164.595 Ft with VAT
    In stock (67 units)
    PCS
    Part of set
    Sets

    NICE automation for sliding gates, set, max 1500kg THOR1500-ZKIT

    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4
    141.969 Ft
    without VAT
    180.301 Ft with VAT
    In stock (67 units)
    SET

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • Automatic motor with BLUEBUS electronics do 1000kg ROBUS-1000

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    Required products
    151.041 Ft
    without VAT
    191.822 Ft with VAT
    In stock (282 units)
    PCS
    Alternatives
    Required products
    Part of set
    Sets

    CAME automation for sliding gates, set, max 1000kg BXV-10-ZKIT

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    Required products
    158.547 Ft
    without VAT
    201.355 Ft with VAT
    In stock (78 units)
    PCS

    NICE actuator for sliding gates ROBUS1000-ZKIT

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    183.956 Ft
    without VAT
    233.624 Ft with VAT
    In stock (282 units)
    SET

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    13.787 Ft
    without VAT
    17.509 Ft with VAT
    In stock (459 units)
    PCS

    Control unit for ROBUS400/600/1000 RBA3R10

    1 pcs
    Mark
    Nice
  • Automatic motor with electronics 1200kg BKS-1200

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4
    166.708 Ft
    without VAT
    211.719 Ft with VAT
    In stock (31 units)
    PCS
    Part of set
    Sets

    CAME automation for sliding gates, set, max 1200kg BKS-1200-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4
    198.030 Ft
    without VAT
    251.498 Ft with VAT
    Low stock (17 units)
    SET
  • Sold out

    Universal stand for sliding gate drives H/UNI-SET

    Material
    Steel
    Surface finish
    Galvanized
    Sold out
    0 Ft
    without VAT
    0 Ft with VAT
    PCS
  • NICE automation for sliding gates, max 1000kg ROBO-1000

    Mark
    Nice
    Module of the gear comb
    mod 4
    Frequency (MHz)
    433
    132.949 Ft
    without VAT
    168.845 Ft with VAT
    In stock (50 units)
    PCS
    Part of set

    Double-channel remote controller NICE FLO2R rollin INTI2

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • CAME automation for sliding gates, max 800kg BKX08AGF

    Mark
    Came
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    147.906 Ft
    without VAT
    187.841 Ft with VAT
    In stock (21 units)
    PCS
    Sets

    CAME automation for sliding gates, set, max 800kg BKX-8-AGF-KKIT

    Mark
    Came
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    195.252 Ft
    without VAT
    247.970 Ft with VAT
    Very low stock (5 units)
    SET