Catalog

Zostavy

(677 products)
  • Canopy system AISI316, M12

    Canopy system AISI316, M12 GS14/PR-R3-M12-set-1800

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Glass t
    12,76
    99.706 Ft
    without VAT
    126.627 Ft with VAT
    In stock (115 units)
    SET
    Alternatives
    Related products
    Part of set
    Technical info
    Canopy system AISI316, M12

    Canopy system AISI316, M12 GS14/PR-R3-M12-set-1800-M

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Glass t
    12,76
    106.366 Ft
    without VAT
    135.085 Ft with VAT
    Low stock (15 units)
    SET
    End cap with hole End cap with hole

    End cap with hole A14/1732-050-10

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    D
    50
    479 Ft
    without VAT
    608 Ft with VAT
    In stock (5339 units)
    PCS
    Cleaning spray 400ml

    Cleaning spray 400ml A/spray-WS

    Material
    Chemicals
    1.678 Ft
    without VAT
    2.131 Ft with VAT
    In stock (3013 units)
    PCS
    Canopy - upper anchoring Canopy - upper anchoring

    Canopy - upper anchoring A14/PR70x40-M12

    2 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Glass for canopy system-VSG/ESG

    Glass for canopy system-VSG/ESG GS/13,14-180x120-clear

    1 pcs
    Material
    Glass
    Surface finish
    Hardened
    Glass t
    13,14
    Canopy - bottom anchoring

    Canopy - bottom anchoring A14/PR70x40-60

    2 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Required products
    Canopy - glass clamp

    Canopy - glass clamp A14/PR-60-M12

    2 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Canopy - rod Canopy - rod

    Canopy - rod A14/PR12-1250-M12

    2 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    L
    1250
  • Canopy system Canopy system

    Canopy system GS14/PR-R3-M12-set-1400

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Glass t
    12,76
    Required products
    78.034 Ft
    without VAT
    99.103 Ft with VAT
    In stock (260 units)
    SET
    Alternatives
    Required products
    Related products
    Part of set
    Technical info
    Canopy system AISI316, M12

    Canopy system AISI316, M12 GS14/PR-R3-M12-set-1400-M

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Glass t
    12,76
    89.501 Ft
    without VAT
    113.666 Ft with VAT
    Low stock (12 units)
    SET
    Glass canop ESG/VSG Glass canop ESG/VSG

    Glass canop ESG/VSG GS14/PR-R-set/glass

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    112.289 Ft
    without VAT
    142.607 Ft with VAT
    In stock (250 units)
    SET
    Chemical anchor 300ml - vinylester Chemical anchor 300ml - vinylester

    Chemical anchor 300ml - vinylester Q5/01GF-300

    Material
    Chemicals
    Use
    Anchoring
    Required products
    2.748 Ft
    without VAT
    3.490 Ft with VAT
    In stock (2287 units)
    PCS
    Chemical anchor 300ml, -20°C vinylester Chemical anchor 300ml, -20°C vinylester

    Chemical anchor 300ml, -20°C vinylester Q5/01GF-300 Nordic

    Material
    Chemicals
    Use
    Anchoring
    Required products
    3.034 Ft
    without VAT
    3.853 Ft with VAT
    In stock (245 units)
    PCS
    Inox anchor M8, L=140mm Inox anchor M8, L=140mm

    Inox anchor M8, L=140mm A19/27-M8

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Shape
    Round bar
    864 Ft
    without VAT
    1.097 Ft with VAT
    In stock (1557 units)
    PCS
    Hexagon socket countersunk head screw, AISI316, M8x20

    Hexagon socket countersunk head screw, AISI316, M8x20 A4-DIN 7991 M8x20

    Material
    Stainless steel AISI 316
    Surface finish
    Raw
    L
    20
    56 Ft
    without VAT
    71 Ft with VAT
    In stock (9983 units)
    PCS
    End cap with hole End cap with hole

    End cap with hole A14/1732-050-10

    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    D
    50
    479 Ft
    without VAT
    608 Ft with VAT
    In stock (5339 units)
    PCS
    Cleaner for stainless steel components - 500ml Cleaner for stainless steel components - 500ml

    Cleaner for stainless steel components - 500ml A/Cleaner-500ml

    Material
    Chemicals
    5.522 Ft
    without VAT
    7.013 Ft with VAT
    In stock (302 units)
    PCS
    Cleaning spray 400ml

    Cleaning spray 400ml A/spray-WS

    Material
    Chemicals
    1.678 Ft
    without VAT
    2.131 Ft with VAT
    In stock (3013 units)
    PCS
    Woolfell P 360, 152x229 mm

    Woolfell P 360, 152x229 mm Q1/G01

    Use
    Grinding
    743 Ft
    without VAT
    944 Ft with VAT
    In stock (2907 units)
    PCS
    Glass for canopy system-VSG/ESG Glass for canopy system-VSG/ESG

    Glass for canopy system-VSG/ESG GS/13,14-140x100-clear

    1 pcs
    Material
    Glass
    Surface finish
    Hardened
    Glass t
    13,14
    Canopy system Canopy system

    Canopy system GS14/PR-R3-M12-set

    1 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Glass t
    8,76-17,52
    Required products
  • Gate actuators set, max 400kg Gate actuators set, max 400kg

    Gate actuators set, max 400kg ROAD400-ZKIT

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    Required products
    101.524 Ft
    without VAT
    128.935 Ft with VAT
    In stock (581 units)
    SET
    Alternatives
    Required products
    Related products
    Part of set
    ROLLKIT automation for sliding gates, kit, max 400 ROLLKIT automation for sliding gates, kit, max 400

    ROLLKIT automation for sliding gates, kit, max 400 DRIFT40-SMART-ZKIT

    Mark
    Rollkit
    Recommended weight of the wing
    200kg
    Drive slowdown
    Drive decelerate before endpoint
    81.268 Ft
    without VAT
    103.210 Ft with VAT
    In stock (278 units)
    SET
    Steel gear rack Zn, 30x8mm, L1m, max 1200kg Steel gear rack Zn, 30x8mm, L1m, max 1200kg

    Steel gear rack Zn, 30x8mm, L1m, max 1200kg H/01Fe-30x8H

    Material
    Steel
    Surface finish
    Galvanized
    Weight of gate Gmax/Goptimal (kg)
    1200
    2.058 Ft
    without VAT
    2.614 Ft with VAT
    In stock (8809 units)
    PCS
    Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma

    Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma H/01PVC-J

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    300
    1.818 Ft
    without VAT
    2.309 Ft with VAT
    In stock (10977 units)
    SET
    Toothed steel rack PVC+Fe,27x20mm,L1m,max 700kg

    Toothed steel rack PVC+Fe,27x20mm,L1m,max 700kg H/01PVC

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    700
    2.317 Ft
    without VAT
    2.943 Ft with VAT
    In stock (6774 units)
    SET
    Rack PVC+Fe,27x18mm,L1m,max 700kg Rack PVC+Fe,27x18mm,L1m,max 700kg

    Rack PVC+Fe,27x18mm,L1m,max 700kg H/01PVC-UP

    Material
    Steel/Nylon
    Material
    Steel/Nylon
    Surface finish
    PVC coated
    2.691 Ft
    without VAT
    3.418 Ft with VAT
    In stock (6774 units)
    SET
    Universal stand for sliding gate drives

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    13.787 Ft
    without VAT
    17.509 Ft with VAT
    In stock (609 units)
    PCS
    Flashing lamp with inbuilt BLUEBUS antenna 12V

    Flashing lamp with inbuilt BLUEBUS antenna 12V MLBT

    Mark
    Nice
    6.526 Ft
    without VAT
    8.288 Ft with VAT
    Low stock (15 units)
    PCS
    Gate remote control 433Mhz, 4CH, rolling code

    Gate remote control 433Mhz, 4CH, rolling code VARIO-FL

    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
    2.658 Ft
    without VAT
    3.376 Ft with VAT
    In stock (1754 units)
    PCS
    Two-channel remote control NICE ERA-FLOR rolling c

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    5.018 Ft
    without VAT
    6.373 Ft with VAT
    In stock (4290 units)
    PCS
    Four-channel remote controller NICE FLO4RE rolling

    Four-channel remote controller NICE FLO4RE rolling FLO4RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    7.284 Ft
    without VAT
    9.251 Ft with VAT
    In stock (538 units)
    PCS
    Wireless keypad NICE FLOR

    Wireless keypad NICE FLOR EDSWG

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling FLOR
    29.191 Ft
    without VAT
    37.073 Ft with VAT
    Low stock (18 units)
    PCS
    Key controller NICE ERA

    Key controller NICE ERA EKS

    Mark
    Nice
    8.052 Ft
    without VAT
    10.226 Ft with VAT
    In stock (85 units)
    PCS
    GSM controller 9-36V DC

    GSM controller 9-36V DC MP/GSM-230-2G

    Mark
    Rollkit
    Frequency (MHz)
    GSM 900/1800
    17.085 Ft
    without VAT
    21.698 Ft with VAT
    In stock (731 units)
    PCS
    Full NICE system for sliding gates max 400kg Full NICE system for sliding gates max 400kg

    Full NICE system for sliding gates max 400kg ROAD-400

    1 pcs
    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    Required products
    Photocell for plaster montage - do 30m

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • Nice drive for a double-leaf gate, set with photocells Nice drive for a double-leaf gate, set with photocells

    Nice drive for a double-leaf gate, set with photocells WINGO3524-ZKIT

    Mark
    Nice
    Max. wing length
    3,5m
    Recommended weight of the wing
    100kg
    178.012 Ft
    without VAT
    226.075 Ft with VAT
    In stock (159 units)
    SET
    Related products
    Part of set
    Backup battery NICE 24V, 1,2Ah

    Backup battery NICE 24V, 1,2Ah PS124

    Mark
    Nice
    20.979 Ft
    without VAT
    26.643 Ft with VAT
    In stock (73 units)
    PCS
    Mechanical stop for WINGO

    Mechanical stop for WINGO PLA-13

    Mark
    Nice
    1.206 Ft
    without VAT
    1.532 Ft with VAT
    In stock (244 units)
    PCS
    Gate remote control 433Mhz, 4CH, rolling code

    Gate remote control 433Mhz, 4CH, rolling code VARIO-FL

    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
    2.658 Ft
    without VAT
    3.376 Ft with VAT
    In stock (1754 units)
    PCS
    Two-channel remote control NICE ERA-FLOR rolling c

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    5.018 Ft
    without VAT
    6.373 Ft with VAT
    In stock (4290 units)
    PCS
    Four-channel remote controller NICE FLO4RE rolling

    Four-channel remote controller NICE FLO4RE rolling FLO4RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    7.284 Ft
    without VAT
    9.251 Ft with VAT
    In stock (538 units)
    PCS
    Bracket rear, adjustable, for screwing

    Bracket rear, adjustable, for screwing PLA-14

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Nice
    Out of stock
    3.814 Ft
    without VAT
    4.844 Ft with VAT
    Backordered
    PCS
    Front console, adjustable, for screwing

    Front console, adjustable, for screwing PLA-15

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Nice
    Out of stock
    3.814 Ft
    without VAT
    4.844 Ft with VAT
    Backordered
    PCS
    Nice drive for double leaf gate, set Nice drive for double leaf gate, set

    Nice drive for double leaf gate, set WINGO-3524

    1 pcs
    Mark
    Nice
    Max. wing length
    3,5m
    Recommended weight of the wing
    100kg
    Photocell for plaster montage - do 30m

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • Nice drive for a double-leaf gate, set with photocells Nice drive for a double-leaf gate, set with photocells

    Nice drive for a double-leaf gate, set with photocells WINGO2024-ZKIT

    Mark
    Nice
    Max. wing length
    2m
    Recommended weight of the wing
    100kg
    160.052 Ft
    without VAT
    203.266 Ft with VAT
    In stock (496 units)
    SET
    Related products
    Part of set
    Backup battery NICE 24V, 1,2Ah

    Backup battery NICE 24V, 1,2Ah PS124

    Mark
    Nice
    20.979 Ft
    without VAT
    26.643 Ft with VAT
    In stock (73 units)
    PCS
    Mechanical stop for WINGO

    Mechanical stop for WINGO PLA-13

    Mark
    Nice
    1.206 Ft
    without VAT
    1.532 Ft with VAT
    In stock (244 units)
    PCS
    Gate remote control 433Mhz, 4CH, rolling code

    Gate remote control 433Mhz, 4CH, rolling code VARIO-FL

    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
    2.658 Ft
    without VAT
    3.376 Ft with VAT
    In stock (1754 units)
    PCS
    External receiver 2 channels univerzal fix/rolling

    External receiver 2 channels univerzal fix/rolling MULTI-RECEIVER

    Mark
    Rollkit
    Frequency (MHz)
    Multi (433/868)
    Code type
    Multi (fix/rolling)
    7.401 Ft
    without VAT
    9.399 Ft with VAT
    In stock (864 units)
    PCS
    Two-channel remote control NICE ERA-FLOR rolling c

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    5.018 Ft
    without VAT
    6.373 Ft with VAT
    In stock (4290 units)
    PCS
    Remote control NICE ONE ERA 2 channels rolling cod

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    5.685 Ft
    without VAT
    7.220 Ft with VAT
    In stock (1168 units)
    PCS
    Four-channel remote controller NICE FLO4RE rolling

    Four-channel remote controller NICE FLO4RE rolling FLO4RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    7.284 Ft
    without VAT
    9.251 Ft with VAT
    In stock (538 units)
    PCS
    Bracket rear, adjustable, for screwing

    Bracket rear, adjustable, for screwing PLA-14

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Nice
    Out of stock
    3.814 Ft
    without VAT
    4.844 Ft with VAT
    Backordered
    PCS
    Front console, adjustable, for screwing

    Front console, adjustable, for screwing PLA-15

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Nice
    Out of stock
    3.814 Ft
    without VAT
    4.844 Ft with VAT
    Backordered
    PCS
    Nice drive for double leaf gate, set Nice drive for double leaf gate, set

    Nice drive for double leaf gate, set WINGO-2024

    1 pcs
    Mark
    Nice
    Max. wing length
    2m
    Recommended weight of the wing
    100kg
    Photocell for plaster montage - do 30m

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • Nice hinged drive for a double-leaf gate, set with photocells Nice hinged drive for a double-leaf gate, set with photocells

    Nice hinged drive for a double-leaf gate, set with photocells HOPPBDKCE

    Mark
    Nice
    Max. wing length
    2,4m
    Recommended weight of the wing
    100kg
    196.635 Ft
    without VAT
    249.726 Ft with VAT
    In stock (87 units)
    PCS
    Alternatives
    Related products
    Part of set
    CAME articulated drive for double-leaf gate, set with photocells CAME articulated drive for double-leaf gate, set with photocells

    CAME articulated drive for double-leaf gate, set with photocells FAST-PLUS-ZKIT

    Mark
    Came
    Max. wing length
    2,3m
    Recommended weight of the wing
    100kg
    188.518 Ft
    without VAT
    239.418 Ft with VAT
    In stock (27 units)
    PCS
    Four-channel remote controller NICE FLO4R 433,9 MH

    Four-channel remote controller NICE FLO4R 433,9 MH FLO4RS

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    7.060 Ft
    without VAT
    8.966 Ft with VAT
    In stock (177 units)
    PCS
    Gate remote control 433Mhz, 4CH, rolling code

    Gate remote control 433Mhz, 4CH, rolling code VARIO-FL

    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
    2.658 Ft
    without VAT
    3.376 Ft with VAT
    In stock (1754 units)
    PCS
    External receiver 2 channels univerzal fix/rolling

    External receiver 2 channels univerzal fix/rolling MULTI-RECEIVER

    Mark
    Rollkit
    Frequency (MHz)
    Multi (433/868)
    Code type
    Multi (fix/rolling)
    7.401 Ft
    without VAT
    9.399 Ft with VAT
    In stock (864 units)
    PCS
    Two-channel remote control NICE ERA-FLOR rolling c

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    5.018 Ft
    without VAT
    6.373 Ft with VAT
    In stock (4290 units)
    PCS
    Four-channel remote controller NICE FLO4RE rolling

    Four-channel remote controller NICE FLO4RE rolling FLO4RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    7.284 Ft
    without VAT
    9.251 Ft with VAT
    In stock (538 units)
    PCS
    Universal gate remote control 433/868Mhz, fix/roll

    Universal gate remote control 433/868Mhz, fix/roll MULTI-MOD-1SB

    Mark
    Rollkit
    Frequency (MHz)
    Multi (433/868)
    Code type
    Multi (fix/rolling)
    4.683 Ft
    without VAT
    5.947 Ft with VAT
    In stock (903 units)
    PCS
    External 2-channel universal receiver with WIFI

    External 2-channel universal receiver with WIFI MULTI-RECEIVER-SMART-02

    Mark
    Rollkit
    Frequency (MHz)
    Multi (433/868)
    Wifi connection
    Yes
    14.971 Ft
    without VAT
    19.013 Ft with VAT
    In stock (103 units)
    PCS
    GSM controller 9-36V DC

    GSM controller 9-36V DC MP/GSM-230-2G

    Mark
    Rollkit
    Frequency (MHz)
    GSM 900/1800
    17.085 Ft
    without VAT
    21.698 Ft with VAT
    In stock (731 units)
    PCS
    Double-channel remote controller NICE FLO2R rollin

    Double-channel remote controller NICE FLO2R rollin FLO2RS

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    4.238 Ft
    without VAT
    5.382 Ft with VAT
    In stock (3017 units)
    PCS
    Remote control NICE ONE ERA 2 channels rolling cod

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    Photocell for plaster montage - BLUEBUS do 30m

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44
    LED flashlight with integrated antenna 12 - 24V

    LED flashlight with integrated antenna 12 - 24V ELDC

    1 pcs
    Mark
    Nice
    Receiver 4- canals NICE ONE

    Receiver 4- canals NICE ONE OXIBD

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • Stainless steel Baluster post

    Stainless steel Baluster post A-VS100-6D12

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Type/Height
    Stair/1000mm
    Out of stock
    13.967 Ft
    without VAT
    17.738 Ft with VAT
    Backordered
    PCS
    Related products
    Part of set
    Technical info
    Diamond hole saw
    New

    Diamond hole saw Q8/DDB-12

    7.024 Ft
    without VAT
    8.920 Ft with VAT
    In stock (25 units)
    PCS
    Sutured brushed inox pipe

    Sutured brushed inox pipe A/42,4x2-1000

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Post
    D42,4x2
    Adjustable handrail bracket Adjustable handrail bracket

    Adjustable handrail bracket A/0718-242

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural
    Required products
    Round bar holders Round bar holders

    Round bar holders A/0830-042

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Filling
    d12
    Required products
    Round base cover Round base cover

    Round base cover A/0512-042

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural
    Flange Flange

    Flange A/0940-042-N

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    Post
    D42,4x2
    Required products
    Small head rivet nut, stainless steel, AISI304, M5mm

    Small head rivet nut, stainless steel, AISI304, M5mm A-FTT-M5

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    12
  • Cable railing AISI304, VR STAIRS AISI304, D42,4/4x Cable railing AISI304, VR STAIRS AISI304, D42,4/4x

    Cable railing AISI304, VR STAIRS AISI304, D42,4/4x A/ZCVS90-3000

    Handrail
    D42,4x2
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    59.195 Ft
    without VAT
    75.178 Ft with VAT
    In stock (73 units)
    SET
    Related products
    Part of set
    Cap nut, stainless steel

    Cap nut, stainless steel A-DIN 917 M10

    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    M
    10
    243 Ft
    without VAT
    309 Ft with VAT
    In stock (4140 units)
    PCS
    Hexagon nut, stainless steel

    Hexagon nut, stainless steel A-DIN 934 M10

    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    M
    10
    51 Ft
    without VAT
    65 Ft with VAT
    In stock (76415 units)
    PCS
    Chemical anchor 300ml - vinylester Chemical anchor 300ml - vinylester

    Chemical anchor 300ml - vinylester Q5/01GF-300

    Material
    Chemicals
    Use
    Anchoring
    Required products
    2.748 Ft
    without VAT
    3.490 Ft with VAT
    In stock (2287 units)
    PCS
    Wedge anchor, stainless steel, AISI304, M10x120mm

    Wedge anchor, stainless steel, AISI304, M10x120mm A-Q5/06-10x120CE

    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    120
    451 Ft
    without VAT
    573 Ft with VAT
    In stock (24509 units)
    PCS
    Mounting kit for stainless steel railings

    Mounting kit for stainless steel railings Q/INOX-INSTALL-SET

    6.571 Ft
    without VAT
    8.345 Ft with VAT
    In stock (1109 units)
    PCS
    Drill bit for inox ,screw-top, HSS-CO5, M5x0.8mm

    Drill bit for inox ,screw-top, HSS-CO5, M5x0.8mm A-DRILL-M5

    Material
    Steel
    Surface finish
    Hardened
    Use
    Drilling
    1.902 Ft
    without VAT
    2.416 Ft with VAT
    In stock (8391 units)
    PCS
    Threaded rod, stainless steel, AISI304, M10/L1000mm

    Threaded rod, stainless steel, AISI304, M10/L1000mm A-DIN 975 M10

    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    1000
    1.392 Ft
    without VAT
    1.768 Ft with VAT
    In stock (17695 units)
    PCS
    Stainless steel tube Stainless steel tube

    Stainless steel tube A/42,4x2-3000-EXCLUSIVE

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Post
    D42,4x2
    Required products
    End cap End cap

    End cap A/5729-242

    2 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural
    Stainless steel Baluster post Stainless steel Baluster post

    Stainless steel Baluster post A-VS90-4D12

    3 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Type/Height
    Stairs/900mm
    Cable clamp Cable clamp

    Cable clamp A14/L6-G

    8 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Filling
    Cable
    Stainless steel cable, roll

    Stainless steel cable, roll A14/7900-005-012

    1 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Raw
    Filling
    Cable
    Required products
    Hexagon socket button head screw, AISI304, M5x12

    Hexagon socket button head screw, AISI304, M5x12 A-DIN 7380-A2 M5x12

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    12
    Cable holder Cable holder

    Cable holder A14/442

    4 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined
    Filling
    Cable
  • Fittings - sliding doors - AL profile AL Fittings - sliding doors - AL profile AL

    Fittings - sliding doors - AL profile AL GS-AL/P8106/N/E-set

    Material
    Aluminium
    Surface finish
    Anodized
    Recommended weight of the wing
    max. 80kg
    Required products
    209.363 Ft
    without VAT
    265.891 Ft with VAT
    Very low stock (2 units)
    SET
    Required products
    Part of set
    Technical info
    Rubber sealing for glass GS-AL/ZP-21x27, L3000mm Rubber sealing for glass GS-AL/ZP-21x27, L3000mm

    Rubber sealing for glass GS-AL/ZP-21x27, L3000mm GS-PVC/ZP-2127-8/N/T

    Material
    Rubber
    L
    3000
    Glass t
    8
    2.779 Ft
    without VAT
    3.529 Ft with VAT
    In stock (27 units)
    PCS
    Rubber sealing for glass GS-AL/ZP-21x27 Rubber sealing for glass GS-AL/ZP-21x27

    Rubber sealing for glass GS-AL/ZP-21x27 GS-PVC/ZP-2127-10/N/T

    Material
    Rubber
    L
    3000
    Glass t
    10
    2.726 Ft
    without VAT
    3.462 Ft with VAT
    Low stock (12 units)
    PCS
    Rubber sealing for glass GS-AL/ZP-21x27, L3000mm Rubber sealing for glass GS-AL/ZP-21x27, L3000mm

    Rubber sealing for glass GS-AL/ZP-21x27, L3000mm GS-PVC/ZP-2127-12/N/T

    Material
    Rubber
    L
    3000
    Glass t
    12
    1.911 Ft
    without VAT
    2.427 Ft with VAT
    In stock (39 units)
    PCS
    Aluminum profile AL-Elox 21x27 mm Aluminum profile AL-Elox 21x27 mm

    Aluminum profile AL-Elox 21x27 mm GS-AL/P8106-DIEL

    1 pcs
    Material
    Aluminium
    Surface finish
    Raw
    Aluminum profile AL-Elox Aluminum profile AL-Elox

    Aluminum profile AL-Elox GS-AL/LN8106/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
    Aluminum profile AL-Elox 21x27 mm Aluminum profile AL-Elox 21x27 mm

    Aluminum profile AL-Elox 21x27 mm GS-AL/LK8106/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
    Aluminum profile AL-Elox 21x27 mm Aluminum profile AL-Elox 21x27 mm

    Aluminum profile AL-Elox 21x27 mm GS-AL/ZP-21x27/N/E-DIEL

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    8-12
    Required products
    Aluminum profile AL-Elox 21x27 mm Aluminum profile AL-Elox 21x27 mm

    Aluminum profile AL-Elox 21x27 mm GS-AL/LZ8106/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
  • Gate plate with handle 265x60, t3mm Gate plate with handle 265x60, t3mm

    Gate plate with handle 265x60, t3mm D12/07-90

    Material
    Steel
    Surface finish
    Raw
    Axial distance
    90mm
    6.394 Ft
    without VAT
    8.120 Ft with VAT
    In stock (164 units)
    SET
    Part of set
    Technical info
    Door handle with plate - left h260, b60, t3mm

    Door handle with plate - left h260, b60, t3mm D12/07L-90

    1 pcs
    Material
    Steel
    Surface finish
    Raw
    Axial distance
    90mm
    Door handle with plate - right h260, b60, t3mm

    Door handle with plate - right h260, b60, t3mm D12/07R-90

    1 pcs
    Material
    Steel
    Surface finish
    Raw
    Axial distance
    90mm
    Square spindle for door handle 8x8x90mm Square spindle for door handle 8x8x90mm

    Square spindle for door handle 8x8x90mm D0/03-Zn

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Shape
    Square rod
    Required products
  • Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma

    Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma H/01PVC-J

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    300
    1.818 Ft
    without VAT
    2.309 Ft with VAT
    In stock (10977 units)
    SET
    Alternatives
    Related products
    Part of set
    Technical info
    Toothed steel rack PVC+Fe,27x20mm,L1m,max 700kg

    Toothed steel rack PVC+Fe,27x20mm,L1m,max 700kg H/01PVC

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    700
    2.317 Ft
    without VAT
    2.943 Ft with VAT
    In stock (6774 units)
    SET
    Rack PVC+Fe,27x18mm,L1m,max 700kg Rack PVC+Fe,27x18mm,L1m,max 700kg

    Rack PVC+Fe,27x18mm,L1m,max 700kg H/01PVC-UP

    Material
    Steel/Nylon
    Material
    Steel/Nylon
    Surface finish
    PVC coated
    2.691 Ft
    without VAT
    3.418 Ft with VAT
    In stock (6774 units)
    SET
    Lightweight gear rack,max 300kg PVC+Fe core, L 1+1m Lightweight gear rack,max 300kg PVC+Fe core, L 1+1m

    Lightweight gear rack,max 300kg PVC+Fe core, L 1+1m H/01PVC-J-2PACK

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    300
    3.480 Ft
    without VAT
    4.420 Ft with VAT
    In stock (9227 units)
    PCS
    Distance spacer for the comb

    Distance spacer for the comb A19/01PVC-05

    Material
    Plastic
    1.342 Ft
    without VAT
    1.704 Ft with VAT
    In stock (1108 units)
    PACK
    Distance spacer for the comb

    Distance spacer for the comb A19/01PVC-10

    Material
    Plastic
    1.791 Ft
    without VAT
    2.275 Ft with VAT
    In stock (2031 units)
    PACK
    Lightweight gear rack,max 300kg PVC+Fe core Lightweight gear rack,max 300kg PVC+Fe core

    Lightweight gear rack,max 300kg PVC+Fe core H/01PVC-J-BS

    1 pcs
    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    300
    Required products
    Assembly set for nylon combs H/01PVC-J

    Assembly set for nylon combs H/01PVC-J H/01PVC-FS-J

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
  • Aluminium sliding gate 6x2.045m with 20x100 R7016 filling - set Aluminium sliding gate 6x2.045m with 20x100 R7016 filling - set

    Aluminium sliding gate 6x2.045m with 20x100 R7016 filling - set FG/S-RLG-R7016-SET

    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    573.502 Ft
    without VAT
    728.348 Ft with VAT
    Low stock (18 units)
    SET
    Part of set
    Set of aluminum post 50x60 and cap - 6000mm R7016

    Set of aluminum post 50x60 and cap - 6000mm R7016 FG/P50x60-6000-R7016

    2 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Set of aluminum post 50x60 and cap - 1850mm R7016

    Set of aluminum post 50x60 and cap - 1850mm R7016 FG/P50x60-1850-R7016

    4 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Narrow cover strip for post profiles and the U-adapter of the fencing system, 20 × 08 – 1.85 m – Anthracite RAL 7016

    Narrow cover strip for post profiles and the U-adapter of the fencing system, 20 × 08 – 1.85 m – Anthracite RAL 7016 FG/PC20x8-1850-R7016

    9 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Aluminum cover for sliding gate guide profiles 105x50 R7016

    Aluminum cover for sliding gate guide profiles 105x50 R7016 FG/CA105x50-R7016

    4 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Hexagon socket head cap screw, AISI304, M10x60

    Hexagon socket head cap screw, AISI304, M10x60 A-DIN 912-A2 M10x60

    8 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    60
    Sheet metal screw with countersunk head-TORX, stainless steel

    Sheet metal screw with countersunk head-TORX, stainless steel A-DIN 7982C-TX-A2 4,2x22

    8 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    Effect
    Natural
    Aluminum fence infill 20 x 100 x 1.1 – 2.0 m – Anthracite RAL 7016 Aluminum fence infill 20 x 100 x 1.1 – 2.0 m – Anthracite RAL 7016

    Aluminum fence infill 20 x 100 x 1.1 – 2.0 m – Anthracite RAL 7016 FG/S20x100x1,1-2000-R7016

    45 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Required products
    Narrow distance cover strip for post profiles and U-adapter of the fencing system, 20 x 08–20 mm – Anthracite RAL 7016

    Narrow distance cover strip for post profiles and U-adapter of the fencing system, 20 x 08–20 mm – Anthracite RAL 7016 FG/PC20x8-20-R7016

    84 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Self-tapping screw with hex head, stainless steel

    Self-tapping screw with hex head, stainless steel A-DIN 7504K-A2 4,2x16

    200 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    16
    Top guide profile for sliding gates 6000mm R7016

    Top guide profile for sliding gates 6000mm R7016 FG/UG54x50-6000-R7016

    1 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Nylon wheel with bearing, Zn

    Nylon wheel with bearing, Zn H/53

    1 pcs
    Material
    Steel/Nylon
    Material
    Steel/Nylon
    Surface finish
    Galvanized
    Guiding profile bottom for sliding gates 6000mm R7016

    Guiding profile bottom for sliding gates 6000mm R7016 FG/BG54x50-6000-R7016

    1 pcs
    Material
    Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Lightweight tooth rack,max 300kg PVC,light,16x20 Lightweight tooth rack,max 300kg PVC,light,16x20

    Lightweight tooth rack,max 300kg PVC,light,16x20 H/01PVC-AL

    12 pcs
    Material
    Nylon
    Surface finish
    Raw
    Weight of gate Gmax/Goptimal (kg)
    300
    Assembly set for nylon combs H/01PVC-AL Assembly set for nylon combs H/01PVC-AL

    Assembly set for nylon combs H/01PVC-AL H/01PVC-FS-AL

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Cross recessed countersunk head chipboard screw, stainless steel, AISI304, 5x35

    Cross recessed countersunk head chipboard screw, stainless steel, AISI304, 5x35 A-DIN 7505A 5x35

    20 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    35
    Wheel for sliding gates with V groove INOX, D80

    Wheel for sliding gates with V groove INOX, D80 H8/31V-80

    2 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    Weight of gate Gmax/Goptimal (kg)
    300
    Hexagon socket head cap screw, AISI304, M8x45

    Hexagon socket head cap screw, AISI304, M8x45 A-DIN 912-A2 M8x45

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    45
    Hexagon nut, stainless steel

    Hexagon nut, stainless steel A-DIN 934 M8

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    M
    8
    Plain washer, stainless steel, M8

    Plain washer, stainless steel, M8 A-DIN 125-A2 M8

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    d
    8,4
    Bottom guiding rail, V, INOX, L6000mm

    Bottom guiding rail, V, INOX, L6000mm H8/39V-6000

    2 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    6000
    Upper slope, Zn, profile 60mm,

    Upper slope, Zn, profile 60mm, H/37-60P

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Universal holder, INOX

    Universal holder, INOX H8/16-46x130

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    Hexagon nut, stainless steel

    Hexagon nut, stainless steel A-DIN 934 M10

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    M
    10
    Plain washer, stainless steel, M10

    Plain washer, stainless steel, M10 A-DIN 125-A2 M10

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    d
    10,5
    Hexagon socket button head screw, AISI304, M10x20

    Hexagon socket button head screw, AISI304, M10x20 A-DIN 7380-A2 M10x20

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw

  • A tradition for over 30 years

  • Wide network of stores

  • Goods in stock

  • Fast delivery of goods in stock
Back to top