Catalog
1 3
SFAB2024BDKCE

A set of underground drives for a double-leaf gate

Mark: Nice, Max. wing length: 2,3m, Recommended weight of the wing: 125kg, Frequency (MHz): 433, End point: No need end points, Code type: Rolling, Drive slowdown: Drive decelerate before endpoint, Motor power supply: DC 24V, Performance: 120W, Force: 250Nm, Power supply: AC 230V, Type: Underground, Controller: MCA2R10, Protection level: IP67

325.934 Ft
without VAT
413.936 Ft
with VAT
PCS
Stock availability
SK Krompachy 5
HU Nagytarcsa 0

Kapcsolat

Adjon meg néhány általános információt a szállítási és kézbesítési irányelveiről.

lubomir.petruska@umakov.sk
+421915093533 +393483490444
Description Parameters Download Parts of set Catalog list Required products Related products Alternative products In sets

Description

Set of propulsion NICE for wing gates into 4m/400kg (Recommended gates parameters 4m/200kg). In pack motors PP7024, PP7224, electronics POA1, receiver OXI, 2x latching. Need for mechanical end stops.

Parameters

Mark
Information about producer of product
Nice
Max. wing length
Maximum wing length for the given drive
2,3m
Recommended weight of the wing
Odporúčaná hmotnosť krídla brány pre správnu funkčnosť pohonu.
125kg
Drive slowdown
Information about the drive slowing down before the end position.
Drive decelerate before endpoint
Type
Underground
Frequency (MHz)
Určuje frekvenciu ovládača a riadiacej elektroniky.
433
End point
Information about the need for gate end stops with the selected drive.
No need end points
Code type
Typ kódu pre správnu kombináciu ovládača s elektronikou.
Rolling
Power supply
Type and value of the power supply voltage
AC 230V
Motor power supply
Type and value of the motor supply voltage
DC 24V
Performance
120W
Force
250Nm
Controller
MCA2R10
Protection level
IP67

Download

PDF
Document for download
PDF
Manual – full version

Parts of set

Távkapcsoló 2 csatornás, ugrókódos rolling code, 4

Remote control NICE ONE ERA 2 channels rolling cod ON-2E

2 pcs
Mark
Nice
Frequency (MHz)
433
Code type
Rolling
Fotocella NICE ERA Medium 30m-ig do 30m

Photocell for plaster montage - do 30m EPM

1 pcs
Mark
Nice
Power supply
12-24V AC/DC
Protection level
IP44
LED villogó antennával 12-24VOLT

LED flashlight with integrated antenna 12 - 24V ELDC

1 pcs
Mark
Nice
Vezérlőegység MCA2 WINGO2024/3524 motorokhoz

NICE WINGO220 control unit MC424

1 pcs
Mark
Nice
Integrált vevő 4 csatornás elektronika NICE ONE

Receiver 4- canals NICE ONE OXIBD

1 pcs
Mark
Nice
Frequency (MHz)
433
Code type
Rolling

Catalog list

Related products

Kúpcsapágyas forgáspont (alsó+felső), D44 Kúpcsapágyas forgáspont (alsó+felső), D44

Hinge for heavy gates (top+bottom), D44 D4/52

Material
Steel
Surface finish
Galvanized
Weight of gate Gmax/Goptimal (kg)
250
4.033 Ft
without VAT
5.122 Ft with VAT
In stock (1113 units)
PCS
Alternatives
Related products
Technical info
Kúpcsapágyas forgáspont (alsó+felső), D50 Kúpcsapágyas forgáspont (alsó+felső), D50

Hinge for heavy gates (top+bottom), D50 D4/52-D50

Material
Steel
Surface finish
Galvanized
Weight of gate Gmax/Goptimal (kg)
400
4.957 Ft
without VAT
6.295 Ft with VAT
In stock (1413 units)
PCS
Kúpcsapágyas forgáspont (alsó+felső), D40

Hinge for heavy gates (top+bottom) with anchoring flange, D40 D4/52P-D40

Material
Steel
Surface finish
Galvanized
Weight of gate Gmax/Goptimal (kg)
300
7.580 Ft
without VAT
9.627 Ft with VAT
In stock (139 units)
PCS
Kúpcsapágyas forgáspont kiegészítő elem

Bracket for hinge D4/52 D4/52-K

Material
Steel
Surface finish
Galvanized
718 Ft
without VAT
912 Ft with VAT
In stock (24 units)
PCS
Hegeszthető bolcni 30x30mm, D30mm Hegeszthető bolcni 30x30mm, D30mm

Gate pin for profile 30x30mm, D30mm D4/45T-30

Material
Steel
Surface finish
Raw
1.092 Ft
without VAT
1.387 Ft with VAT
In stock (65 units)
PCS
Technical info
Kapu forgáspont-talpas M20-Zn, 80x80x105mm, d30mm Kapu forgáspont-talpas M20-Zn, 80x80x105mm, d30mm

Adjustable hinge with anchor flange M20-Zn, 80 D4/58-M20

Material
Steel
Surface finish
Galvanized
Weight of gate Gmax/Goptimal (kg)
100
2.665 Ft
without VAT
3.385 Ft with VAT
In stock (67 units)
PCS
Related products
Technical info
Hegeszthető bolcni 30x30mm, D30mm Hegeszthető bolcni 30x30mm, D30mm

Gate pin for profile 30x30mm, D30mm D4/45T-30

Material
Steel
Surface finish
Raw
1.092 Ft
without VAT
1.387 Ft with VAT
In stock (65 units)
PCS
Földalatti meghajtókészlet kétszárnyú kapuhoz
umakov-hu

A set of underground drives for a double-leaf gate

325.934 Ft
Set of propulsion NICE for wing gates into 4m/400kg (Recommended gates parameters 4m/200kg). In pack motors PP7024, PP7224, electronics POA1, receiver OXI, 2x latching. Need for mechanical end stops.
View product

  • A tradition for over 30 years

  • Wide network of stores

  • Goods in stock

  • Fast delivery of goods in stock
Back to top