A14/2500-900

Corner glass clamp

Material: Stainless steel AISI 316, Surface finish: Satined, Filling: Glass, Glass t: 6/6,76/8/8,76/10/10,76/12/12,76, Model: Model 25

6.277 Ft
without VAT
7.972 Ft
with VAT


PCS
Stock availability
SK Krompachy > 250
HU Nagytarcsa 17

Kapcsolat

Adjon meg néhány általános információt a szállítási és kézbesítési irányelveiről.

lubomir.petruska@umakov.sk
+421915093533 +393483490444

Description

A glass (sheet metal, plate) infill holder is a structural element used to fasten and stabilize glass or sheet infill in various constructions, such as railings, balconies or stairs. This holder ensures a firm and secure attachment of the filling, thus increasing the overall stability and safety of the structure. They are part of modern architectural solutions that combine functionality, safety and aesthetic appearance. When choosing a holder, it is important to consider its material, design, functionality and compatibility with a specific filling and overall construction. It serves as a corner joint to connect the infill, holding the infill (insurance against falling out) is achieved by means of a clamping joint (recommended use for top anchoring) or a clamping joint + safety pin (recommended use for lateral anchoring). The holder does not include a seal (necessity to buy 4 pcs of seals according to the thickness of the glass) and caps for the screws.

Parameters

Material
Defines the material from which the product is made.
Stainless steel AISI 316
Surface finish
Surface finish of product
Satined
Glass t
Determines the thickness of the glass in mm the product is suitable for
6/6,76/8/8,76/10/10,76/12/12,76
Filling
Determines use based on the size and shape of the infill
Glass
Model
Model 25

Catalog list

Required products

End cap PVC - matt surface A19/04-PVC

Material
Plastic
Effect
Gray
9 Ft
without VAT
11 Ft with VAT
In stock (1628031 units)
PCS

Rubber inlay for glass clamp A19/25-006

Material
Rubber
Surface finish
Raw
Glass t
6
55 Ft
without VAT
70 Ft with VAT
In stock (9741 units)
PCS

Rubber inlay for glass clamp A19/25-007

Material
Rubber
Surface finish
Raw
Glass t
6,76
54 Ft
without VAT
69 Ft with VAT
In stock (4236 units)
PCS

Rubber inlay for glass clamp A19/25-008

Material
Rubber
Surface finish
Raw
Glass t
8
55 Ft
without VAT
70 Ft with VAT
In stock (76329 units)
PCS

Rubber inlay for glass clamp A19/25-009

Material
Rubber
Surface finish
Raw
Glass t
8,76
55 Ft
without VAT
70 Ft with VAT
In stock (54291 units)
PCS

Rubber inlay for glass clamp A19/25-010

Material
Rubber
Surface finish
Raw
Glass t
10
55 Ft
without VAT
70 Ft with VAT
In stock (35685 units)
PCS
Alternatives

Rubber inlay for glass clamp A19/22-008

Material
Rubber
Surface finish
Raw
Glass t
8
46 Ft
without VAT
58 Ft with VAT
In stock (218976 units)
PCS

Rubber inlay for glass clamp A19/25-011

Material
Rubber
Surface finish
Raw
Glass t
10,76
55 Ft
without VAT
70 Ft with VAT
In stock (107976 units)
PCS
Alternatives
Sets

Rubber inlay for glass clamp A19/22-009

Material
Rubber
Surface finish
Raw
Glass t
8,76
46 Ft
without VAT
58 Ft with VAT
In stock (318318 units)
PCS

Frameless glass juliette balcony 110x75/8,76 GS/FRB3-110x75-D42/10,76

Material
Stainless steel AISI 304
Surface finish
Satined
Glass t
10,76
70.427 Ft
without VAT
89.442 Ft with VAT
In stock (57 units)
SET

Rubber inlay for glass clamp model A19/25-012

Material
Rubber
Surface finish
Raw
Glass t
12
55 Ft
without VAT
70 Ft with VAT
In stock (15523 units)
PCS
Alternatives

Rubber inlay for glass clamp A19/22-010

Material
Rubber
Surface finish
Raw
Glass t
10
46 Ft
without VAT
58 Ft with VAT
In stock (140472 units)
PCS

Rubber inlay for glass clamp A19/25-013

Material
Rubber
Surface finish
Raw
Glass t
12,76
55 Ft
without VAT
70 Ft with VAT
In stock (37150 units)
PCS
Corner glass clamp
umakov-hu

Corner glass clamp

6.277 Ft
A glass (sheet metal, plate) infill holder is a structural element used to fasten and stabilize glass or sheet infill in various constructions, such as railings, balconies or stairs. This holder ensures a firm and secure attachment of the filling, thus increasing the overall stability and safety of the structure. They are part of modern architectural solutions that combine functionality, safety and aesthetic appearance. When choosing a holder, it is important to consider its material, design, functionality and compatibility with a specific filling and overall construction. It serves as a corner joint to connect the infill, holding the infill (insurance against falling out) is achieved by means of a clamping joint (recommended use for top anchoring) or a clamping joint + safety pin (recommended use for lateral anchoring). The holder does not include a seal (necessity to buy 4 pcs of seals according to the thickness of the glass) and caps for the screws.
View product