Guide profile with holes Zn, 70x60x3.5mm, L3m

Galvanized steel bottom guide profile with holes for cantilever sliding gate 70 × 60 × 3.5 mm – 3.0 m
Product code: H/02-70x60-Zn-D-3000

The galvanized steel guide profile is designed for cantilever sliding gates. It ensures stable guidance and smooth movement of the gate leaf. Thanks to the mounting holes, it allows screwing to the gate frame, or it can be welded to the frame.
For the design of the running system, use Gate Sizing.

Material
Structural steel.

Surface finish
Galvanizing for corrosion protection of the steel surface.

Dimensions and technical parameters
Profile dimensions: 70 × 60 mm.
Wall thickness: 3.5 mm.
Length: 3,000 mm.
Design: with mounting holes.
Mounting: by screwing or welding to the gate frame.

Mounting and compatibility
The profile is attached to the frame of the cantilever sliding gate by screwing through the prepared holes or by welding. It is used with compatible support carriages selected according to the passage width and gate weight. When designing the running system, carriages and other components corresponding to the passage width and gate weight for a 6 m profile must be selected: (product code SV-70x60Zn clasic) or (product code SV-70x60Zn clasic-Nylon) after replacing profiles with holes. A suitable set of running components can be designed using the Gate Sizing application.
When welding galvanized parts, safety precautions must be observed to protect against fumes from the zinc layer. After welding, it is necessary to properly treat the damaged areas of the surface finish.

Advantages
Galvanized surface for corrosion protection.
Mounting holes for screwing to the gate frame.
Possibility of attachment also by welding.
Stable guidance and smooth movement of the gate leaf.
Length 3 m suitable for the production of a cantilever sliding gate.